Telenetics Network Card V34M 336 User Manual

Alliance / Datalink Series  
PENRIL MODEM FAMILY  
V.34M/33.6, V.32M/19.2, V.32M/14.4  
KEY FEATURES  
Universal, multimode, multispeed data and fax modems  
High performance Digital Signal Processing provides fast, flexible communications,  
33.6Kbps to 300bps with DTE speeds to 230Kbps and support for 14.4Kbps fax traffic  
Supports advanced features that maximize network uptime  
Multiple hardware versions to satisfy diverse installation requirements  
Rapid set-up for both local and remote devices  
Continuous Data Terminal Equipment (DTE) and telephone line status reporting and  
comprehensive diagnostics  
Compatible with Group 3, Class 1 and Class 2 fax and supports multiple modulation standards  
and speeds for fax transmission  
Supports automatic dial backup for leased line and dial applications  
Multiple levels of network security  
ADVANCED V.34 FEATURES  
The Raymar-Telenetics Penril V.34 modem operates at speeds up to 33.6Kbps over the standard Public Switched  
Telephone Network (PSTN) in accordance with ITU-R V.34 recommendation and over 2- or 4-wire unconditioned  
leased lines. Call setup is accommodated by either ITU-R V.8 or V.25 procedures. Channel probing by the Penril V.34  
automatically conditions the unit for maximum throughput and performance. Asymmetrical connection data rates allow  
maximum throughput when channel directional characteristics differ. The Penril V.34 provides fallback rates in  
accordance with the V.34 recommendation to accomodate channel limtis: 33.6K, 28.8K, 26.4K, 24.0K, 21.6K, 19.2K,  
16.8K, 14.4K, 12.0K, 9600, 7200, 4800, 2400, 1200, 600, and 0-300 bits per second (bps).  
INSTALLED BASE COMPATIBILITY  
The Raymar-Telenetics Penril V.34 will fall back to non-V.34 modes to connect with installed base V.32terbo, V.32bis,  
V.32, V.22bis, Bell 212A, V.22, V.21, and V.23 modems. Also, the Penril family of modems support ITU-T V.13 for  
half-duplex simulation to work with those systems already configured for half-duplex modems. The V.29 Fast Train  
(FT) mode is available for multidrop applications on all Penril modems.  
FAX TRANSMISSIONS  
The Raymar-Telenetics Penril modem family is compatible with Group 3, Class1, and Class 2 fax and supports  
multiple modulation standards and speeds for fax transmission, including:  
ITU-T V.17 at 14.4K, 12.0K, 9600 & 7200bps  
ITU-T V.29 at 9600 & 7200 bps  
ITU-T V.27ter at 4800 & 2400bps  
ITU-T V.21 channel 2 at 300bps for T.30  
Integrated support for fax traffic means that the Penril family works with standard communications software packages  
to:  
Receive faxes on your computer and print faxes on a local plain paper printer  
Send faxes directly from your computer, and,  
RAYMAR INFORMATION  
TECHNOLOGY, INC.  
7325 Roseville Road  
Send data at rates up to 230.4Kbps  
NETWORK MANAGEMENT  
The management software built into the Raymar-Telenetics Penril modem family is compatible with Penril Communi-  
cations Series 6000 Network Management System. The Series 6000 provides centralized configuration, status  
monitoring and diagnostic control over a network of Penril modems in any operating mode: dial-up line, leased line, or  
a combination of both. The Penril reports the condition of the attached DTE port and telephone line to the network  
management console for easy detection and diagnosis of network faults.  
Sacramento, CA 95842  
916-783-1951  
FAX 916-783-1952  
1-800-695-1951  
Tech Support Hotline  
1-800-747-1522  
 

Thermos Gas Grill 461240504 User Manual
Toshiba DVD Player SD 5980SU User Manual
Tricity Bendix Cooktop SG 205WL User Manual
Tricity Bendix Freezer TB 85 F User Manual
Tripp Lite Battery Charger SUBF2030 User Manual
Troy Bilt Lawn Mower TB230 User Manual
Uniden Portable Radio Marine Radio User Manual
Varimixer Mixer W20SF User Manual
Varimixer Mixer W80A User Manual
Wasp Bar Code Scanner WDT3250 RF User Manual